YHG003 Full Surface Continuous Geared Hinges Easy Installation
Full Surface Continuous Geared Hinges
Application:
- Bi-fold applications
- Security moldings
- Warranty:1 Year
Certificate:
- UL Certified
- Overview
- Recommended Products
Bi-fold door pairs are among the hardest-working openings in commercial buildings — and the hardest on hardware. Every cycle flexes the meeting point between panels, and conventional hinges loosen, squeak, and sag in short order. The YHG003 continuous geared hinge is the full surface model configured specifically for bi-fold applications, running continuously along the panel edge so the folding joint is supported from head to sill.
Why bi-fold doors need continuous support. In a bi-fold pair, the pivoting panel hangs partly off the adjacent panel rather than entirely off the frame. Point-loaded butt hinges concentrate that cantilevered weight on two or three screws per leaf — the root cause of bi-fold misalignment. The YHG003's interlocking gear leaves spread the load over the full panel height, keeping both panels aligned and the fold action smooth through years of service in schools, hospitals, hotels, and office buildings.
Easy installation, minimal clearance. The YHG003 is a true surface-mount product: no mortising, no door reinforcement, and no frame reinforcement up to 200 lbs (16-gauge channel above). Only 1/32" (1 mm) clearance is recommended between doors plus standard lockside clearance, preserving tight sightlines. With 16, 20, or 24 sex bolts per length (83"/95"/119") and #12-24 self-drilling jamb screws, an installer can hang a bi-fold pair in a fraction of the time a mortise system requires — the reason this model carries its "Easy Installation" designation.
Technical Specifications
Item |
Specification |
Type |
Full Surface Continuous Geared Hinge — Bi-fold Applications |
Lengths |
83" (2108 mm) / 95" (2413 mm) / 119" (3023 mm) / Custom |
Sex bolts (door) |
16 / 20 / 24 pcs — 1/4-20 x 1-1/4" |
Screws (jamb) |
38 / 38 / 46 pcs — #12-24 x 11/16" self-drilling |
Clearance |
1/32" (1 mm) min. between doors + standard lockside clearance |
Inset / frame |
1/16" inset; 7/8" minimum frame |
Fire rating |
Up to 3-hour metal / 90-minute wood composite |
Certifications |
BHMA & UL |
Warranty |
1 Year |
Options |
Hospital Tip; Electrified module |
FAQ
Q: Is the YHG003 only for bi-fold doors?
A: It is optimized for bi-fold applications — including security molding conditions — where its continuous support prevents panel misalignment.
Q: How much clearance is needed between the folding panels?
A: Just 1/32" (1 mm) minimum between doors, plus standard lockside clearance.
Q: Does installation require door or frame reinforcement?
A: No door reinforcement is needed, and no frame reinforcement up to 200 lbs.