Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
50 workers complete evacuation extinguisher practice at meihe hardware industry co ltd-0

News

Home >  News

50 Workers Complete Evacuation, Extinguisher Practice at Meihe Hardware Industry Co., Ltd.

Nov 17, 2026
Meihe Hardware Industry Co., Ltd., together with Dingrui Safety Technology (Wenzhou) Co., Ltd., conducted a fire drill on Nov. 5 at its first-floor workshop, second-floor workshop and an outdoor area. The exercise simulated a sudden fire in the workshop, an emergency evacuation and the initial stage of firefighting. Two specialists from Dingrui Safety Technology provided guidance throughout, and 50 workers from the workshop took part.
 
Item Details
Date November 5
Venue First-floor workshop, second-floor workshop, outdoor area
Participants 2 instructors from Dingrui Safety Technology; 50 Meihe Hardware Industry Co., Ltd. workers
Modules Risk briefing, emergency evacuation, hands-on equipment practice, review and corrective action
 
image1.jpeg
 
Before the drill: hazards first, then movements
 
Before the exercise began, the instructors identified fire risk points based on the workshop's actual material storage, electrical equipment and workflow routes, and explained the alarm reporting process, the principles of initial firefighting and escape procedures. Fire lanes, emergency exits and the locations of firefighting equipment were pointed out one by one on the shop floor, and the duties of each team's guides and the outdoor assembly point were confirmed on the spot. Which point to check when something goes wrong, which way to run, and who is in command — with those settled first, the practical movements could follow.
 
image2.jpeg
 
Evacuation: signal given, full withdrawal
 
Once the drill signal was sounded, the emergency evacuation procedure was activated immediately. The 50 workers in the first- and second-floor workshops moved out quickly along predetermined routes in a low, crouched posture, with guides stationed at stairwells and corridor corners to direct the flow. The routes remained clear throughout, with no crowding and no one moving against the flow. On reaching the outdoor assembly point, each team checked names against its roster and reported up the chain of command, confirming that no one had been left behind.
 
Hands-on: extinguishers and hydrants
 
In the outdoor practical area, the two instructors demonstrated the four steps of operating a dry powder extinguisher — lift, pull, grip, press — as well as how to connect a fire hydrant and discharge water. They also explained positioning upwind of the fire, safe distances and the need to watch for remaining embers. The 50 workers took turns in groups to put out simulated fire points, with the instructors correcting grip, spray angle and timing of withdrawal on the spot.
 
image3.jpeg
 
Review: problems listed, owners assigned
 
After the drill, the two sides reviewed the exercise item by item — evacuation time, transmission of instructions, use of equipment and on-site order — and turned the weak points into a checklist, with improvement measures and responsible persons specified alongside. The head of the workshop said that workplace safety is the precondition for production. The workshop will revise its emergency response procedures in line with the problems exposed by the drill, build safety training and hazard inspection into the daily schedule, and assign responsibility to specific positions and individuals.
 

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000