YHG005 Continuous Geared Hinges Concealed Leaf Full Mortised
Concealed Leaf Continuous Geared Hinges
Application:
- Lead lined model for hospital x-ray room doors with double row of screws to straddle lead (specify "LL")
- Door edge protection lip
- Frame and door leaf alignment ribs for proper hinge and door location
- 3/32" (2 mm) inset
Certificate:
- UL Certified
- Overview
- Recommended Products
Renovation doors take abuse — carts, gurneys, luggage, and years of impact concentrate on the door edge, the one surface most hinges ignore. The YHG005 concealed leaf continuous geared hinge adds an integral door edge protection lip to the proven concealed-leaf platform, armoring the vulnerable edge while the full-length gear train carries the door's weight.
Built for renovation with new doors and/or frames. The YHG005 mounts flush with a 3/32" (2 mm) inset, requires no mortising, and covers hinge cut-outs left in frames by previous butt hinges. Frame and door leaf alignment ribs locate the hinge precisely during installation, so replacement hangs go faster and come out square. No reinforcement is needed in the door or frame up to 200 lbs, with a 16-gauge channel used above that weight.
Edge protection that pays for itself. On high-traffic openings in hospitals, schools, and hotels, door edges chip, delaminate, and fail inspection long before the door core does. The YHG005's protection lip shields the edge along its full height — particularly valuable on wood composite fire doors, where edge damage can compromise the rated assembly. And like its YHG004 sibling, it is available in a lead-lined "LL" model with a double row of screws to straddle the lead for hospital x-ray room doors.
Technical Specifications
Item |
Specification |
Type |
Concealed Leaf Continuous Geared Hinge |
Lengths |
83" (2108 mm) / 95" (2413 mm) / 119" (3023 mm) / Custom |
Hole count (door / jamb) |
19/19 · 20/20 · 23/23 |
Clearance |
5/16" (8 mm) hinge side + standard lockside clearance |
Fasteners |
#12-24 x 11/16" flat head self-drilling screws |
Inset |
3/32" (2 mm); flush mount |
Reinforcement |
None needed (door and frame) to 200 lbs; 16-gauge channel over |
Fire rating |
Up to 3-hour metal / 90-minute wood composite |
Certifications |
BHMA & UL |
Special |
Door edge protection lip; LL lead-lined model |
Options |
Hospital Tip; Electrified module |
FAQ
Q: What does the door edge protection lip do?
A: It runs the full height of the door edge, shielding it from impact damage in high-traffic corridors — extending door life and protecting rated assemblies.
Q: Is the YHG005 suitable for fire-rated wood doors?
A: Yes, it is UL rated up to 90 minutes on wood composite doors and 3 hours on metal doors.
Q: Can it replace existing butt hinges in a retrofit?
A: Yes. It mounts without mortising and covers hinge cut-outs in the frame.