EN
S88 Weatherstrip Adhesive Gaskets Industrial
Adhesive Gaskets
- Colors: Black, White, Grey
- Available Lengths: 17', 21', 25', 30', 204', 510'
- Width: 1/2” (12.7 mm)
- Height: 1/4” (6.4 mm)
Certificate:
- UL
- Overview
- Recommended Products
Silicone Seal
* Seal begins compressing at 1/4". Compresses to seal up to a 1/16" gap.
* Available in black, clear, dark brown, gray, tan and white.
* S88 is available in 17, 18, 20, 21, 25, 30, 204 and 510 ft. coils.
* SiliconSeal is extruded from high-temperature silicone; effective between -58°F and 450°F.
* Self-extinguishing and non-toxic. Unaffected by sunlight, ozone and ultraviolet rays.
* Impervious to fungus and mildew; will not deteriorate under normal exposure.
* Meets FAR 25.853 Airworthiness Standards for Compartment Interiors.
* Category J - Doors - gasketing that has been tested on a positive pressure fire door and frame but is not required for the door to obtain its fire door rating. Category J gasketing does not negatively affect the rating on a positive pressure door.
* Category J gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes.
* Storage and shelf life: All adhesive gaskets have a limited shelf life. This product must be used within 6 months of purchase and must be stored between 50 degrees (F) and 100 degrees (F). For further notes/details, please see Adhesive Gasketing section.
| Finishes: |
| S88BL: BL - Black Silicone |
| S88C: C - Clear Silicone |
| S88DB: DB - Dark Brown Silicone |
| S88LB: LB - Light Brown Silicone |
| S88GR: GR - Gray Silicone |
| S88TAN: TAN - Tan Silicone |
| S88W: W - White Silicone |
