Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
s88 ul certified weatherstrip adhesive gaskets industrial-0

Adhesive Gaskets

Home >  Products >  Gasketing >  Adhesive Gaskets

S88 UL Certified Silicone Weatherstrip Adhesive Gaskets Industrial

Adhesive Gaskets
          
- Colors: Black, White, Grey
- Available Lengths: 17', 21', 25', 30', 204', 510'
- Width: 1/2” (12.7 mm)
- Height: 1/4” (6.4 mm)
          
Certificate:
- UL Certified

  • Overview
  • Recommended Products

The S88 adhesive silicone gasket is the baseline seal of the Meihe gasketing range and, for many distributors, the single SKU that covers the widest variety of openings. Extruded from high-temperature silicone and supplied with a self-adhesive backing, it presses into the rebate of the door frame in the impact-free zone — no screws, no drilling, and no need to remove the door. At 1/2" wide by 1/4" high, the S88 begins compressing at 1/4" and closes gaps up to 1/16" without adding noticeable closing resistance.

The widest length and color program in the range. The S88 is stocked in 17', 18', 20', 21', 25', 30', 204' and 510' coils. That spread matters commercially: short coils suit a single retrofit opening, while 204' and 510' bulk coils let a contractor seal an entire floor of doors from one roll with minimal waste and no joins. Seven finishes — black (S88BL), clear (S88C), dark brown (S88DB), light brown (S88LB), gray (S88GR), tan (S88TAN) and white (S88W) — let the seal disappear against painted frames, anodized aluminum, or wood without a special order.

Documented compliance for submittals. The S88 is UL listed as Category J gasketing: it has been tested on positive-pressure fire door and frame assemblies and does not negatively affect the door's rating. It is approved for use with listed steel frames and hollow metal doors rated up to 3 hours, wood and plastic-covered composite doors up to 1-1/2 hours, and wood core doors rated 20 minutes. It also meets FAR 25.853 Airworthiness Standards for Compartment Interiors — an unusual credential for a door seal, and the reason the S88 is specified for aircraft compartment interiors and other transport applications where flammability and smoke toxicity are tightly controlled.

Material behavior over the life of the building. Meihe's SiliconSeal compound operates from -58°F to 450°F, is self-extinguishing and non-toxic, and is unaffected by sunlight, ozone and ultraviolet rays. It is impervious to fungus and mildew and will not deteriorate under normal exposure. In practice that means the seal stays flexible on a cold exterior door in winter and does not chalk, crack or shrink on a sun-facing opening in summer — the two failure modes that send maintenance crews back to replace cheaper vinyl weatherstrip.

Installation and storage. Clean the contact surface thoroughly and make sure any paint is fully cured before applying; position the seal in the impact-free zone of the frame rebate so the door does not strike it directly. Like all Meihe adhesive gaskets, the S88 has a limited shelf life: use within 6 months of purchase and store between 50°F and 100°F.

Typical applications: hospitals, hotels, dormitories, nursing facilities, schools, government buildings, offices, and commercial and industrial openings requiring fire, smoke, sound, draft and light control, in both new construction and retrofit.

Technical Specifications

Item

Specification

Product

S88 Weatherstrip Adhesive Gaskets Industrial

Type

Self-adhesive perimeter seal / silicone gasket

Material

High-temperature silicone (SiliconSeal)

Width

1/2" (12.7 mm)

Height

1/4" (6.4 mm)

Compression

Begins compressing at 1/4"; seals gaps up to 1/16"

Available lengths

17', 18', 20', 21', 25', 30', 204', 510' coils

Finishes

BL black, C clear, DB dark brown, LB light brown, GR gray, TAN tan, W white

Working temperature

-58°F to 450°F

Fire / listing

UL; Category J — 3 hr hollow metal, 1-1/2 hr wood composite, 20 min wood core

Additional approval

Meets FAR 25.853 Airworthiness Standards for Compartment Interiors

Mounting

Self-adhesive, applied to frame rebate, no door removal

Shelf life

Use within 6 months; store 50°F–100°F

FAQ

Q: What gap does the S88 seal?

A: It starts compressing at 1/4" and seals gaps up to 1/16". For larger gaps, specify a Meihe aluminum-retainer perimeter gasket instead.

Q: Is the S88 approved for fire-rated doors?

A: Yes. It is UL listed as Category J gasketing for steel frames and hollow metal doors up to 3 hours, wood composite doors up to 1-1/2 hours, and 20-minute wood core doors.

Q: Why does FAR 25.853 matter on a door gasket?

A: It confirms the silicone meets the flammability requirements for aircraft compartment interiors, making the S88 suitable for transport and other low-smoke, low-toxicity environments.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000